Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Actuator/Solenoid Disassembly

SBL/SCL — Actuator/Solenoid Disassembly

For the SBL/SCL.

Procedure

  1. Tap the top of plunger downward with a hammer to loosen the plunger.
  2. Pull the entire assembly (actuator, plunger, and roller plate) out of the transfer switch and disassemble.

Source: manual:mp5668.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.