Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›REMOVE VALVE ASSEMBLY

G5 — REMOVE VALVE ASSEMBLY

For the G5.

Before you start

  • Identify all usable parts for correct
  • Intake valves do not have valve stem seals.

Procedure

  1. Compress valve spring using JOE138 Vaive Spring Compressor (A) as shown.
  2. Remove retaining locks (B) using a small magnet.
  3. Remmove valve spring compressor from head. 4, Remove valve spring cap (D) and valve spring (C). A—JDE138 Valve Spring Compressor B—Retainer Locks C—Vaive Springs D—Valve Spring Caps AG,CTM&86,G5,15 -+9-06SEP94
  4. Remove oil shield (A) from exhaust valves. Remove valve (B) from cylinder head. identify valve for reassembly, if valve is to be reused. NOTE: Intake valves do not have valve stem seals.
  5. Repeat procedure on remaining valves. -UN-07SEP94 — AG,CTM86,G5,16 -19-06SEP94 CTM86 (260CT94) Series 450 6081 Diese! Engines 271094 Cylinder Head and Valves

Source: manual:Component Technical Manual 8.1L 6081 1994.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.