PSI (Power Solutions Intl) — Procedure 2

A PSI (Power Solutions Intl) service procedure — check it applies to your exact model before use.

Browse PSI (Power Solutions Intl) generators & specs →

Procedure

1. 1) Remove breather
2. 2) Remove plug
3. 3) Remove gear housing (key point 1)
4. 4) Remove front oil seal (key point 2)

Source: manual:4.5L-Engine-Service-Manual-7610033-2.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.