Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Valve Lash Adjustment

PSI HD 560001-R2 — Valve Lash Adjustment

For the PSI HD 560001-R2.

Browse PSI HD generators & specs →

Procedure

  1. 1. Once TDC cylinder 1 is set, with the rocker arm assemblies exposed, adjust both the intake & exhaust valves on cylinder 1, adjust the intake valve for cylinder 2, and exhaust valve on cylinder 3.
  2. 2. Rotate the cam gear 180 degrees by turning the crankshaft, this will set cylinder 4 at TDC.
  3. 3. Now, adjust cylinder 4 intake & exhaust valves, adjust cylinder 2's exhaust valve, and cylinder 3's intake valve.

Specs & torque values

  • Intake & Exhaust (Cold) 0.13-0.18 mm
  • Intake & Exhaust (Warm) 0.23-0.28 mm

Source: manual:7610001-0.998L-Service-Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.