PSI HD 560001-R2 — Serpentine Belt Installation and Adjustment

For the PSI HD 560001-R2.

Browse PSI HD generators & specs →

Procedure

1. 1. Loosen two lower generator mounting bolts.
2. 2. Loosen the upper generator adjusting bolt.
3. 3. Adjust the generator until the generator belt meets its required tension.
4. 4. Measure serpentine belt deflection by applying 98 Nm to the belt between the fan pulley and generator pulley.
5. 5. Tighten the upper generator adjusting bolt.
6. 6. Tighter two lower generator mounting bolts.

Source: manual:7610001-0.998L-Service-Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.