Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Flywheel Housing and Backing Plate Installation

PSI HD 560001-R2 — Flywheel Housing and Backing Plate Installation

For the PSI HD 560001-R2.

Browse PSI HD generators & specs →

Procedure

  1. 1. Install the backing plate on to the engine.
  2. 2. Install the flywheel housing using flywheel housing mounting bolts (1).
  3. 3. Torque flywheel housing mounting bolts (1) to 50 ft/lbs.
  4. 4. Install flywheel housing backing plate using backing plate mounting bolts (2).

Tools required

  • Torque wrench

Specs & torque values

  • Flywheel housing mounting bolts torque: 50 ft/lbs

Source: manual:7610001-0.998L-Service-Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.