HomeRepair guidesOperating & Maintenance Manual

PSI/Doosan — Operating & Maintenance Manual

For these PSI/Doosan models: C185, C185WKUB-T2 Export (E04).

Browse PSI/Doosan generators & specs →

Procedure

  1. 1.
  2. Locate the statement “The weight of cargo should never exceed xxx kg or xxx
  3. lbs” on your vehicle’s placard.
  4. 2.
  5. This figure equals the available amount of cargo and luggage load capacity.
  6. 3.
  7. Determine the combined weight of luggage and cargo being loaded on the
  8. vehicle. That weight may not safely exceed the available cargo.
  9. Whenever the machine is stopped, air will flow back into the compressor system from devices
  10. or systems downstream of the machine unless the service valve is closed. Install a check valve
  11. at the machine service valve to prevent reverse flow in the event of an unexpected shutdown
  12. when the service valve is open. Stop machine to add fuel.
  13. Hazardous Substance Precaution
  14. The following substances are used in the manufacture of this machine and may be hazardous
  15. to health if used incorrectly.Avoid ingestion, skin contact and breathing fumes for the following
  16. substances: Antifreeze, Compressor Oil, Engine Lubricating Oil, Preservative Grease, Rust
  17. Preventative, Diesel Fuel and Battery Electrolyte.
  18. Safety
  19. Operating & Maintenance Manual
  20. Book: 46555713 (1-28-2011) Rev B
  21. 13
  22. Operating & Maintenance Manual
  23. Safety
  24. 14
  25. Book: 46555713 (1-28-2011) Rev B
  26. Safety
  27. Operating & Maintenance Manual
  28. Book: 46555713 (1-28-2011) Rev B
  29. 15
  30. Operating & Maintenance Manual
  31. Safety
  32. 16
  33. Book: 46555713 (1-28-2011) Rev B
  34. Look for these signs on machines shipped to markets in North America, which point out
  35. potential hazards to the safety of you and others. Read and understand thoroughly. Heed
  36. warnings and follow instructions. If you do not understand, inform your supervisor.
  37. DANGER
  38. !
  39. DANGER (Red Background) indicates an imminently hazardous situation
  40. which, if not avoided, will result in death or serious injury.
  41. WARNING
  42. !
  43. WARNING (Orange Background) indicates a potentially hazardous
  44. situation which, if not avoided, could result in death or serious injury.
  45. CAUTION
  46. !
  47. CAUTION (Yellow Background) indicates a potentially hazardous
  48. situation which, if not avoided, may result in minor or moderate injury.
  49. NOTICE
  50. NOTICE (Blue Background) indicates important set-up, operating or
  51. maintenance information.
  52. Safety
  53. Operating & Maintenance Manual
  54. Book: 46555713 (1-28-2011) Rev B
  55. 17
  56. Operating & Maintenance Manual
  57. Safety
  58. 18
  59. Book: 46555713 (1-28-2011) Rev B
  60. Safety
  61. Operating & Maintenance Manual
  62. Book: 46555713 (1-28-2011) Rev B
  63. 19
  64. Free Safety Decals
  65. Safety Decals are available free of charge. Safety Decals are identified by the decal
  66. heading: DANGER, WARNING, or CAUTION.
  67. Decal part numbers are on the bottom of each decal and are also listed in the
  68. compressor’s parts manual. Submit orders for Safety Decals to the Statesville Parts
  69. Service Department. The no charge order should contain only Safety Decals. Help
  70. promote safety! Assure that decals are present on the machines. Replace decals that
  71. are not readable.
  72. Operating & Maintenance Manual
  73. Safety
  74. 20
  75. Book: 46555713 (1-28-2011) Rev B
  76. Book: 46555713 (1-28-2011) Rev B
  77. 21
  78. NOISE EMISSION
  79. Operating & Maintenance Manual
  80. NOISE EMISSION
  81. 22
  82. Book: 46555713 (1-28-2011) Rev B
  83. Noise Emission - NA (Export Only machine)
  84. This section pertains only to machines distributed within the United
  85. States.
  86. WARNING
  87. !
  88. Tampering with Noise Control System Prohibited
  89. Federal law prohibits the following acts or the causing thereof:
  90. 1.
  91. The removal or rendering inoperative by any persons, other than for purposes
  92. of maintenance, repair, or replacement, of any device or element of design
  93. incorporated into any new compressor for the purpose of noise control prior to
  94. its sale or delivery to the ultimate purchaser or while it is in use; or
  95. 2.
  96. the use of the compressor after such device or element of design has been
  97. removed or rendered inoperative by any person.
  98. Among those acts included in the prohibition against tampering are these:
  99. 3.
  100. Removal or rendering inoperative any of the following:
  101. a.the engine exhaust system or parts thereof
  102. b.the air intake system or parts thereof
  103. c.enclosure or parts thereof
  104. 4.
  105. Removal of any of the following:
  106. a.fan shroud
  107. b.vibration mounts
  108. c.sound absorption material
  109. 5.
  110. Operation of the compressor with any of the enclosure doors open.
  111. Compressor Noise Emission Control Information
  112. A. The removal or rendering inoperative, other than for the purpose of
  113. maintenance, repair, or replacement of any noise control device or element of
  114. design incorporated into this compressor in compliance with noise control act;
  115. B. The use of this compressor after such device or element of design has been
  116. removed or rendered inoperative.
  117. NOTE: The above information applies only to units that are built in
  118. compliance with the U.S. Environmental Protection Agency.
  119. Doosan Portable Power reserves the right to make changes or add improvements without
  120. notice and without incurring any obligation to make such changes or add such improvements
  121. to products sold previously.
  122. The Purchaser is urged to include the above provisions in any agreement for any resale of this
  123. compressor.
  124. Book: 46555713 (1-28-2011) Rev B
  125. 23
  126. Section 4 - GENERAL DATA
  127. Operating & Maintenance Manual
  128. GENERAL DATA
  129. 24
  130. Book: 46555713 (1-28-2011) Rev B
  131. General Data
  132. Unit Model:
  133. FLUID CAPACITIES
  134. Compressor Lubricant...............................................10 quarts (9.5 litres)
  135. Engine Crankcase Lubricant ....................................10 quarts (9.5 litres)
  136. Fuel Tank .................................................................20 U.S gal. (76 litres)
  137. Radiator ....................................................................2.5 U.S. gal. (76 litres)
  138. RUNNING GEAR
  139. Tire Size....................................................................ST175/80 D13
  140. Inflation Pressure (Cold) ...........................................50 psi
  141. Towing Speed (Maximum)........................................65 mph (105 km/hr)
  142. UNIT MEASUREMENTS & WEIGHT
  143. Overall Length...........................................................11.0 (5.2 meters)
  144. Overall Height ...........................................................4.9 feet (2.3 meters)
  145. Overall Width ...........................................................5.6 feet (2.6 meters)
  146. Track Width....................................................

Source: manual:46555713 C185WKUB-T2 (E04) OPS 1-28-2011.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.