Power Solutions International — Starting the engine
Operation
From a Power Solutions International operator's manual — check it applies to your exact model before use.
Browse Power Solutions International generators & specs →
Before you start
- Do not start or run in closed or poorly ventilated building.
- Exhaust gases may contain poisonous carbon monoxide.
Procedure
- Turn on gas supply to engine.
- Turn ignition key to START position.
- After engine starts, return key to ON position.
- If engine stalls, wait 3 to 4 seconds before re-engaging starter.
- Do not operate starter continuously longer than 10 seconds.
- Observe at least 1-minute interval between cranking periods.
Specs & values
- Wait 3-4 seconds after stall
- Max 10 seconds cranking
- 1-minute interval between cranking
Source: Power Solutions International operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.