Power Solutions International — Oil Fill Procedure (PTO installed on engine)
Maintenance · Side PTO
From a Power Solutions International service manual — check it applies to your exact model before use.
Browse Power Solutions International generators & specs →
Procedure
- Remove plug (3) from either front housing (2) or rear housing (5).
- Remove plug (4) from rear housing (5).
- Add oil through port where plug (4) was removed until oil drains from plug (3) port.
- Reinstall plug (3) once oil stops draining.
- Reinstall plug (4).
Specs & values
- Approximate oil capacity .21 qts (200 mL)
Source: Power Solutions International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.