Power Solutions International — Ignition system assembly
Repair & overhaul
From a Power Solutions International service manual — check it applies to your exact model before use.
Browse Power Solutions International generators & specs →
Procedure
- Check the clearance of the sparking plug with a feeler; the clearance is 0.35mm.
- Adjust the clearance of the sparking plug if it is not right.
- Tighten the sparking plug with the sparking plug wrench.
- Place the ignition coil and tighten the bolt of the ignition coil.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Spark plug clearance 0.35mm
- Spark plug torque 25-28 N·m
Source: Power Solutions International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.