Power Solutions International 560001-R2 — Repairing Twisted Leads
Repair & overhaul · Wire harness
For the Power Solutions International 560001-R2, from the Power Solutions International service manual.
Browse Power Solutions International generators & specs →
Procedure
- Locate damaged wire.
- Remove insulation as required.
- Splice two wires together using splice clips and rosin core solder.
- Cover splice with tape to insulate from other wires.
- Retwist as before and tape with electrical tape and hold in place.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Power Solutions International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.