Power Solutions International 560001-R2 — Oil Pan Removal
Repair & overhaul
For the Power Solutions International 560001-R2, from the Power Solutions International service manual.
Browse Power Solutions International generators & specs →
Procedure
- Drain oil pan by removing the oil drain plug into a suitable container.
- Remove the 3 bolts from the crank end cover, then the 18 bolts from under the oil pan.
- Remove the oil pan and gasket.
Source: Power Solutions International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.