Power Solutions International 560001-R2 — Metri-Pack Series 150 Terminal Removal
Repair & overhaul · Metri-Pack connector
For the Power Solutions International 560001-R2, from the Power Solutions International service manual.
Browse Power Solutions International generators & specs →
Procedure
- Slide the seal back on the wire.
- Insert tool BT-8518, or J 35689, or equivalent to release the terminal locking tab.
- Push the wire and terminal out through the connector. If reusing the terminal, reshape the locking tab.
Tools required
- Tool BT-8518, or J 35689, or equivalent Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Power Solutions International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.