Power Solutions International 560001-R2 — Flywheel Housing and Backing Plate Installation
Repair & overhaul
For the Power Solutions International 560001-R2, from the Power Solutions International service manual.
Browse Power Solutions International generators & specs →
Procedure
- Install the backing plate on to the engine.
- Install the flywheel housing using flywheel housing mounting bolts (1).
- Torque flywheel housing mounting bolts (1) to 50 ft/lbs.
- Install flywheel housing backing plate using backing plate mounting bolts (2).
Specs & values
- Flywheel housing mounting bolts 50 ft/lbs
Source: Power Solutions International service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.