Perkins — Fuel Transfer Pump - Remove

Repair & overhaul

From a Perkins service manual — check it applies to your exact model before use.

Browse Perkins generators & specs →

Procedure

1. Turn the fuel supply to the "OFF" position.
2. Place a suitable container below the fuel transfer pump to catch spilled fuel.
3. Disconnect hose assemblies (1) and (2) from fuel transfer pump (4). Cap the hose assemblies.
4. Remove bolts (3) and remove fuel transfer pump (4).
5. Remove the O-ring seal from fuel transfer pump (4).

Source: Perkins service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →