Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fuel Manifold Removal

Perkins — Fuel Manifold Removal

A Perkins service procedure — check it applies to your exact model before use.

Browse Perkins generators & specs →

Procedure

  1. Thoroughly clean the area around fuel manifold
  2. Disconnect hose assembly connection from fuel injection pump
  3. Disconnect hose assembly connection from fuel distribution block
  4. Remove bolts from fuel manifold
  5. Remove fuel manifold from the valve mechanism cover
  6. If necessary, release hose clamp on plastic tube assembly
  7. Disconnect plastic tube assembly from fuel manifold
  8. Use Tooling (A) to cap the open port in fuel manifold
  9. Remove seal from plastic tube assembly
  10. Use Tooling (A) to plug the open end of plastic tube assembly

Tools required

  • Capping Kit

Source: manual:Disassembly and Assembly-SM-PERKINS 850 SERIES 854E-E34TA AND 854F-E34T.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.