Perkins — Fuel Filter Base - Remove (Option 2)
Repair & overhaul
From a Perkins service manual — check it applies to your exact model before use.
Browse Perkins generators & specs →
Before you start
- NOTICE: Keep all parts clean from contaminants.
Procedure
- Turn fuel supply to OFF.
- Place container below fuel filter base.
- Cut cable strap (4). Disconnect fuel pressure sensor (5) from engine harness.
- Disconnect tube assembly (3) and hose assembly (6).
- Remove secondary fuel filter (8) and O-ring seal.
- Remove bolts (1) and washers (2); remove fuel filter base (7).
- If necessary, remove bracket (12): remove bolts (9) and washers (13).
Source: Perkins service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.