Perkins — Fuel Filter Base - Disassemble (Option 2)
Repair & overhaul
From a Perkins service manual — check it applies to your exact model before use.
Browse Perkins generators & specs →
Before you start
- NOTICE: Keep all parts clean from contaminants.
Procedure
- Remove fuel priming pump (1).
- Remove fuel pressure sensor (10).
- Remove adapter (6) and O-ring seal (5).
- Remove fuel check valve (13); remove O-ring seal (14) and cap (12).
- Mark and remove elbow connection (2); remove O-ring seal (4).
- Mark and remove elbow connection (11); remove O-ring seal (9).
- Remove plug (7) and O-ring seal (8).
Source: Perkins service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.