Perkins — Fuel Filter Base - Assemble (Option 2)
Repair & overhaul
From a Perkins service manual — check it applies to your exact model before use.
Browse Perkins generators & specs →
Before you start
- NOTICE: Keep all parts clean from contaminants.
Procedure
- Ensure all components are clean and free from damage.
- Install new O-ring seal (8) to plug (7); install and tighten plug to 40 N·m (30 lb ft).
- Install new O-ring seal (4) to elbow connection (3); install and tighten locking nut (3) to 50 N·m (37 lb ft).
- Install new O-ring seal (9) to elbow connection (11); install and tighten to 40 N·m (30 lb ft).
- Install new O-ring seal (14) to fuel check valve (13); install and tighten to 30 N·m (22 lb ft).
- Install new O-ring seal (5) to adapter (6); install and tighten adapter to 40 N·m (30 lb ft).
- Install fuel pressure sensor (10) to elbow connection (11).
- Install fuel priming pump (1).
Specs & values
- 40 N·m (30 lb ft)
- 50 N·m (37 lb ft)
- 30 N·m (22 lb ft)
Source: Perkins service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.