Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Main Fuel Filter Canister Replacement

Perkins — Main Fuel Filter Canister Replacement

A Perkins service procedure — check it applies to your exact model before use.

Browse Perkins generators & specs →

Before you start

  • Discard the used canister and fuel oil in a safe place and in accordance with local regulations.
  • Only genuine Perkins parts must be used. The use of a non-genuine canister may damage the fuel system and void warranty.

Procedure

  1. Thoroughly clean the filter head (A1) and the canister (A3).
  2. Put a suitable container under the fuel filter assembly.
  3. Use a suitable strap wrench (A2) to remove the canister. Discard the canister.
  4. Lubricate the top of the new canister seal with clean fuel oil.
  5. Fit the new fuel filter canister and tighten it by hand only.
  6. Prime the fuel system.
  7. Remove the container.
  8. Run the engine and check for leaks.

Tools required

  • strap wrench

Source: manual:4006-23 series_TPCD1508-000-en.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.