Perkins — Engine Crankcase Breather Element - Replace
Maintenance
From a Perkins owner's manual — check it applies to your exact model before use.
Browse Perkins generators & specs →
Before you start
- Hot oil and hot components can cause personal injury.
Procedure
- Ensure that dirt cannot enter the breather assembly. Place a container under the breather assembly.
- Rotate the cap counterclockwise into the unlocked position and remove the cap from the body of the breather.
- Note the orientation of the filter element and remove the filter element.
- Remove the old seal and install a new seal.
- Install a new filter element into the breather body; orient so that position A is aligned.
- Align position B on the cap with position A on the filter element.
- Install the cap. Rotate the cap by hand clockwise until the cap locks into the locked position.
- Remove the container.
- Check the system for damage and ensure that the outlet is clear and free from obstructions.
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.