Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›. The engine lubricating oil is cooled and the

Perkins — . The engine lubricating oil is cooled and the

A Perkins service procedure — check it applies to your exact model before use.

Browse Perkins generators & specs →

Before you start

  • Note: Do not store an engine that has biodiesel in the

Procedure

  1. 1. Ensure that the engine is clean and dry.
  2. 2. Drain any water from the primary filter water
  3. 3. The engine oil will not need to be drained in order
  4. 4. Remove the drive belt from the engine.

Source: manual:Perkins_1106_Engine_Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.