Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Long-Term Engine Storage Procedure

Perkins SEBU8731 — Long-Term Engine Storage Procedure

For the Perkins SEBU8731.

Applies to: Perkins SEBU8731

Before you start

  • Do not store an engine that has biodiesel in the fuel system

Procedure

  1. Ensure that the engine is clean and dry. If the engine has been operated using biodiesel, the system must be drained and new filters installed. The fuel tank will require flushing. Fill the fuel system with an acceptable fuel. For more information on acceptable fuels refer to this Operation and Maintenance Manual, "Fluid recommendations". Operate the engine for 15 minutes in order to remove all biodiesel from the system.
  2. Drain any water from the primary filter water separator. Ensure that the fuel tank is full.
  3. The engine oil will not need to be drained in order to store the engine. Provided the correct specification of engine oil is used the engine can be stored with the oil in the crankcase.
  4. Ensure that the engine is secure and level.
  5. Store the engine in a clean, dry place.

Specs & torque values

  • Acceptable fuel

Source: manual:28e494.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.