Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fuel Temperature

Perkins NGW, YG — Fuel Temperature

For the Perkins NGW, YG.

Browse Perkins generators & specs →

Before you start

  • Note: Many of the engine control systems and
  • Note: This information is pertinent in the United States, in Canada and in Europe.
  • Note: If the engine crankcase is full, drain enough
  • Note: The mixture of VCI oil can be added to the inlet
  • Note: Install all covers. Ensure that tape has been

Procedure

  1. System Voltage
  2. member that the capacity of an eyebolt is less as the angle between the supporting members and the ob- ject becomes less than 90 degrees.
  3. on fuel filter element in order to remove any dirt and water. Drain any sleeve metering fuel pump.
  4. Inspect/Adjust/Replace” for the correct procedure. 4. Replace the fuel filter elements. 5. Remove the plastic covers from the air cleaner elements. 6. Use a bar or a turning tool in order to turn the engine in the normal direction of rotation. The procedure ensures that no hydraulic locks or resistance exist. 7. Before starting the engine, remove the valve cover or covers. Put a large amount of engine oil on the camshaft, cam followers, and valve mechanism in order to prevent damage to the mechanism.
  5. hand side of the engine. M0098787 33

Source: manual:Perkins-OMM1706A-E93TA-and-1706D-E93TA.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.