Perkins 1106 — Stopping the Engine
Operation
For the Perkins 1106, from the Perkins owner's manual.
Applies to: Perkins 1106
Before you start
- Stopping the engine immediately after working under load can result in overheating and accelerated wear.
Procedure
- Remove the load from the engine. Reduce the engine speed to low idle.
- Allow the engine to idle for five minutes in order to cool the engine.
- Stop the engine and turn the ignition key switch to the OFF position.
Full service-parts list: Perkins 1106 →
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.