Perkins 1106 — Starting with Jump Start Cables
Operation · Battery / starting system
For the Perkins 1106, from the Perkins owner's manual.
Applies to: Perkins 1106
Before you start
- Improper jump start cable connections can cause an explosion resulting in personal injury.
Procedure
- Turn the start switch on the stalled engine to OFF. Turn off all accessories.
- Connect one positive jump cable end to the positive terminal of the discharged battery; the other to the positive terminal of the source.
- Connect one negative jump cable end to the negative terminal of the source; the other to the engine block or chassis ground.
- Start the engine.
- Immediately after starting, disconnect the jump start cables in reverse order.
Tools required
- Jump start cables Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Use ONLY equal voltage for jump starting
Full service-parts list: Perkins 1106 →
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.