Perkins 1106 — Injector Trim File

Maintenance · Electronic Unit Injector

For the Perkins 1106, from the Perkins service manual.

Applies to: Perkins 1106, Perkins 1106D engine

Procedure

1. Record the serial number and confirmation code number for each electronic unit injector.
2. Obtain the injector trim file from Service Software Files or the compact disc.
3. Enter the serial number for the electronic unit injector in the search field.
4. Download the injector trim file to the PC.
5. Connect the electronic service tool to the diagnostic connector.
6. Turn the keyswitch to the ON position.
7. Select Service, Calibrations, Injector Trim Calibration.
8. Select the appropriate cylinder and click Change.
9. Select the appropriate injector trim file and click Open.
10. Enter the confirmation code number if prompted and click OK.
11. Repeat the procedure for each cylinder.

Full service-parts list: Perkins 1106 →, Perkins 1106D engine →

Source: Perkins service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →