Perkins 1106 — Fuel System - Prime (Electric Fuel Priming Pump)

Maintenance

For the Perkins 1106, from the Perkins owner's manual.

Applies to: Perkins 1106

Procedure

1. Ensure the fuel system is in working order and the fuel supply valve is in the ON position.
2. Turn the keyswitch to the RUN position and operate the switch for the electric priming pump.
3. After 90 seconds the fuel system will be primed and the electric fuel priming pump will turn off.
4. Operate the engine starter and crank the engine; run at low idle for a minimum of five minutes.

Full service-parts list: Perkins 1106 →

Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →