Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Perkins›Fuel System Filter - Replace

Perkins 1106 — Fuel System Filter - Replace

Maintenance · Fuel system (secondary filter)

For the Perkins 1106, from the Perkins owner's manual.

Applies to: Perkins 1106

Before you start

  • Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.

Procedure

  1. Ensure the fuel supply valve is in the OFF position. Place a container under the fuel filter.
  2. Clean the outside of the fuel filter. Remove the canister with a suitable tool and discard it safely.
  3. Lubricate the O ring seal with clean fuel oil and install the new canister.
  4. Tighten the canister by hand. Do not use a tool.
  5. Remove the container, dispose of the fuel, and open the fuel supply valve.
  6. Prime the fuel system.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Perkins 1106 →

Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →