Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Perkins›Flash Programming a Flash File

Perkins 1106 — Flash Programming a Flash File

Operation · Electronic Control Module (ECM)

For the Perkins 1106, from the Perkins service manual.

Applies to: Perkins 1106, Perkins 1106D engine

Procedure

  1. Obtain the part number for the new flash file.
  2. Connect the electronic service tool to the service tool connector.
  3. Turn the keyswitch to the ON position. Do not start the engine.
  4. Select WinFlash from the Utilities menu.
  5. Program the flash file into the ECM.
  6. Start the engine and check for proper operation.
  7. Access the Configuration screen and program parameters with a tattletale of 0.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Perkins 1106 →, Perkins 1106D engine →

Source: Perkins service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Perkins repair guides →