Perkins 1106 — Engine Air Cleaner Element (Dual Element) - Clean/Replace
Maintenance
For the Perkins 1106, from the Perkins owner's manual.
Applies to: Perkins 1106
Before you start
- Never run the engine without an air cleaner element installed.
Parts for this job
- WA11994 Air filter Amazon eBay $114.47
Part numbers from the service-parts list for Perkins 1106. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove the cover and remove the primary air cleaner element.
- The secondary air cleaner element should be removed and discarded for every three cleanings of the primary element.
- Cover the air inlet with tape in order to keep dirt out.
- Clean the inside of the air cleaner cover and body with a clean, dry cloth.
- Remove the tape from the air inlet. Install the secondary element and a new or cleaned primary element.
- Install the air cleaner cover.
- Reset the air cleaner service indicator.
Specs & values
- Pressurized air cleaning: use filtered dry air with a maximum pressure of 207 kPa (30 psi)
Full service-parts list: Perkins 1106 →
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.