Perkins 1106 — Crankcase Breather (Canister) - Replace
Maintenance · Crankcase breather canister
For the Perkins 1106, from the Perkins owner's manual.
Applies to: Perkins 1106
Procedure
- Place a container under the canister.
- Clean the outside of the canister and remove it with a suitable tool.
- Lubricate the O ring seal of the new canister with clean engine oil and install it.
- Tighten the canister to 12 N·m (8 lb ft). Do not overtighten.
- Remove the container and dispose of the old canister and oil safely.
Tools required
- Suitable tool Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Canister torque 12 N·m (8 lb ft)
Full service-parts list: Perkins 1106 →
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.