Perkins 1106 — Battery Electrolyte Level - Check
Maintenance
For the Perkins 1106, from the Perkins owner's manual.
Applies to: Perkins 1106
Before you start
- All lead-acid batteries contain sulfuric acid which can burn the skin and clothing.
Parts for this job
Part numbers from the service-parts list for Perkins 1106. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove the filler caps and maintain the electrolyte level to the FULL mark on the battery.
- If water is necessary, use distilled water or clean low-mineral water.
- Check the condition of the electrolyte with a suitable battery tester.
- Install the caps and keep the batteries clean.
- Clean the battery case with a recommended solution and thoroughly rinse with clean water.
Tools required
- Battery tester Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Perkins 1106 →
Source: Perkins owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.