Northern Lights — SP2 Oil Changes
Maintenance · engine
From a Northern Lights operator's manual covering: M20C, M844LW2, M844W2. Check it applies to your exact model before use.
Applies to: Northern Lights M20C, Northern Lights M844LW2, Northern Lights M844W2, Northern Lights 844W2 / 844LW2 engine, Northern Lights 844W2 engine, Northern Lights 844LW2 engine
Before you start
- Never use a flushing oil or put additives in the crankcase.
Procedure
- Change the engine oil and oil filter after 50 hours; use Service CC 30 weight oil during the first 100 hours.
- Change oil and filter again at 100 hours, then every 250 hours.
- In intermittent cold weather, change oil every 100 hours or six weeks, whichever comes first.
- Change oil at the end of each season and the beginning of each season.
- Change oil when engine is warm.
- Loosen the clamp on the oil change tube, remove cap, drain oil, replace cap and tube.
- Refill engine with recommended oil for the season.
- Dispose of waste oil in an approved manner.
Specs & values
- 844W2 and 844LW2 - 2.1 gallons (8.2 liters) with new oil filter
Full service-parts list: Northern Lights M20C →, Northern Lights M844LW2 →, Northern Lights M844W2 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.