Northern Lights — Propulsion Engine Starting
Operation
From a Northern Lights owner's manual covering: L6140A, L6140AL2, M6140A, M6140AL2, M6140QA. Check it applies to your exact model before use.
Applies to: Northern Lights M6140A, Northern Lights M6140AL engine
Before you start
- Never race a cold engine.
Procedure
- Place gear control in the neutral position.
- Move throttle control to full speed position and return to idle.
- Turn key to first position; check voltmeter.
- Cold weather: hold preheat 20-30 seconds.
- Turn key to starting position; release key as soon as engine starts.
- Move throttle up until engine runs at approximately 1000 RPM.
- Do not crank starter more than 20 seconds consecutively.
Specs & values
- Voltmeter should not read below 12 volts; 24 volts for 24 volt systems
Full service-parts list: Northern Lights M6140A →
Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.