Home›Repair guides›Northern Lights›Connecting Booster Batteries

Northern Lights NL844LW2 / NL844W2 — Connecting Booster Batteries

Operation · Battery

For the Northern Lights NL844LW2 / NL844W2, from the Northern Lights operator's manual.

Applies to: Northern Lights NL844LW2, Northern Lights NL844W2, Northern Lights 844 / 844L engine, Northern Lights 844L engine

Before you start

  • Battery gas can explode. Keep all flames and sparks away from batteries.

Procedure

  1. Check battery electrolyte level; add distilled water if necessary.
  2. Booster and main batteries must have the same voltage rating.
  3. Connect positive (+) terminal of booster battery to positive (+) terminal of main battery.
  4. Connect negative (-) terminal of booster battery to ground on the engine block.
  5. Remove booster battery after starting engine.
  6. Sealed batteries: see manufacturer charging and booster instructions.

Full service-parts list: Northern Lights NL844LW2 →, Northern Lights NL844W2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →