Home›Repair guides›Northern Lights›Changing Engine Oil

Northern Lights NL844LW2 / NL844W2 — Changing Engine Oil

Maintenance · Engine crankcase

For the Northern Lights NL844LW2 / NL844W2, from the Northern Lights operator's manual.

Applies to: Northern Lights NL844LW2, Northern Lights NL844W2, Northern Lights 844 / 844L engine, Northern Lights 844L engine

Before you start

  • Never put additives or flushing oil in crankcase.

Parts for this job

Part numbers from the service-parts lists for Northern Lights NL844LW2, Northern Lights NL844W2. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Change oil when engine is warm.
  2. Loosen the clamp on the oil change tube. Remove cap. Drain oil. Replace cap and tube.
  3. Refill engine with recommended oil for the season. Capacity with new oil filter is 2.1 gallons (8.2 liters) on NL844W2 & LW2.
  4. Change oil every 100 hours or six weeks in intermittent cold weather.
  5. Dispose of waste oil in an approved manner. Never use a flushing oil.

Specs & values

  • 2.1 gallons (8.2 liters) with new oil filter

Full service-parts list: Northern Lights NL844LW2 →, Northern Lights NL844W2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →