Home›Repair guides›Northern Lights›Battery Care and Booster Batteries

Northern Lights NL844 / NL844W3 — Battery Care and Booster Batteries

Maintenance

For the Northern Lights NL844 / NL844W3, from the Northern Lights owner's manual.

Applies to: Northern Lights NL844, Northern Lights NL844W3, Northern Lights 844L engine

Before you start

  • Battery gas can explode; keep flames and sparks away from batteries.
  • Always remove grounded (-) battery clamp first and replace ground clamp last.
  • Booster and main batteries must have the same voltage rating.

Procedure

  1. Check electrolyte level daily; add distilled water to manufacturer's recommended level.
  2. Check and clean batteries, cables and terminals every 100 hours.
  3. Clean corrosion with water and baking soda solution; flush with clean water.
  4. Tighten terminals and grease them to inhibit corrosion.
  5. Check battery condition with a hydrometer every 250 hours.
  6. For boosting: connect positive booster terminal to positive main battery terminal.
  7. Connect negative booster terminal to ground on the engine block.
  8. Remove booster battery after starting engine.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Batteries, cables and terminals checked and cleaned every 100 hours
  • Hydrometer check every 250 hours

Full service-parts list: Northern Lights NL844 →, Northern Lights NL844W3 →

Source: Northern Lights owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →