Northern Lights NL498D2 / NL498K2 — Stopping

Operation · Generator set

For the Northern Lights NL498D2 / NL498K2, from the Northern Lights operator's manual.

Applies to: Northern Lights NL498D2

Procedure

1. Remove electrical load from the generator set.
2. Run engine for a three to five minute cool-down period.
3. Move Engine Control switch to STOP until engine stops completely.
4. Shut off fuel valve at the tank.

Full service-parts list: Northern Lights NL498D2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →