Northern Lights NL488K2 / NL488W2 — Stopping

Operation · Generator set

For the Northern Lights NL488K2 / NL488W2, from the Northern Lights operator's manual.

Applies to: Northern Lights NL488K2, Northern Lights NL488W2

Procedure

1. Remove electrical load.
2. Run engine 3 to 5 minutes cool-down.
3. Move Engine Control switch to STOP until engine stops completely.
4. Shut off fuel valve at tank.

Full service-parts list: Northern Lights NL488K2 →, Northern Lights NL488W2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →