Northern Lights NL488K2 / NL488W2 — Operating

Operation · Generator set

For the Northern Lights NL488K2 / NL488W2, from the Northern Lights operator's manual.

Applies to: Northern Lights NL488K2, Northern Lights NL488W2

Procedure

1. Check gauges often. Oil pressure must be above 15 PSI.
2. DC voltmeter should read 11 to 15 volts at 80°F (25°C) ambient.
3. Water temperature must be below 200°F (94°C).
4. Let unit run unloaded 3 to 5 minutes warm-up.
5. Add electrical load.

Full service-parts list: Northern Lights NL488K2 →, Northern Lights NL488W2 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →