Northern Lights M984 — Oil Change

Maintenance · Engine crankcase

For the Northern Lights M984, from the Northern Lights operator's manual.

Applies to: Northern Lights M984

Before you start

  • Never use a flushing oil.

Parts for this job

Part numbers from the service-parts list for Northern Lights M984. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Change oil when engine is warm but not hot.
  2. Loosen clamp on oil change tube, remove cap, and drain oil.
  3. Replace cap and tube.
  4. Refill engine with recommended oil.

Specs & values

  • Engine capacity with new oil filter: 2.4 gallons (9.0 liters).

Full service-parts list: Northern Lights M984 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →