Northern Lights M984 — Changing Lube Oil Filter
Maintenance
For the Northern Lights M984, from the Northern Lights operator's manual.
Applies to: Northern Lights M984
Before you start
- Overtightening can damage filter housing.
Parts for this job
- 24-05401 Oil filter Amazon eBay $33.15
Part numbers from the service-parts list for Northern Lights M984. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove old filter with filter wrench and dispose properly.
- Remove and discard old gasket; clean mount face.
- Spread thin film of engine oil on new filter gasket.
- Screw filter on until gasket meets sealing surface.
- Tighten one-half turn farther by hand only.
- Fill engine, start and check for leaks; stop, wait 3 minutes, check oil level.
Tools required
- Filter wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Oil filter part number 24-05401 Amazon eBay $33.15.
- Change every 200 hours.
Full service-parts list: Northern Lights M984 →
Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.