Home›Repair guides›Northern Lights›Bleeding the Fuel System

Northern Lights M984 — Bleeding the Fuel System

Maintenance

For the Northern Lights M984, from the Northern Lights operator's manual.

Applies to: Northern Lights M984

Before you start

  • Escaping diesel fuel under pressure can penetrate skin causing serious personal injury.

Procedure

  1. Loosen bleed nipple on top of fuel filter.
  2. Pump hand primer on fuel lift pump until pure fuel without bubbles escapes.
  3. Tighten bleed nipple.
  4. If engine does not start, loosen one fuel line at injector while cranking.
  5. Tighten connection when pure fuel escapes; do each line one at a time.
  6. After start, check for leaks using cardboard or wood.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Northern Lights M984 →

Source: Northern Lights operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →