Northern Lights M844LW3 / M844W3 — Install wet exhaust outlet tube
Installation · Wet exhaust outlet tube kit (item 23)
For the Northern Lights M844LW3 / M844W3, from the Northern Lights service manual.
Applies to: Northern Lights M844LW3, Northern Lights M844W3
Procedure
- Note the tube (item 23) shape: short curved end connects to exhaust elbow, longer end goes through rear panel.
- Apply rubber lubricant to the inside of the short blue silicone hose and push it onto the tube.
- Apply rubber lubricant to the grommet and squeeze the barbed end through the grommet hole.
- Install the four hose clamps without tightening; rotate the tube to its best position.
- Push the blue hose onto the genset exhaust elbow, position clamps and tighten.
Full service-parts list: Northern Lights M844LW3 →, Northern Lights M844W3 →
Source: Northern Lights service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.