Northern Lights M844LW3 / M844W3 — Install toe brackets
Installation · Soundshield base / toe bracket
For the Northern Lights M844LW3 / M844W3, from the Northern Lights service manual.
Applies to: Northern Lights M844LW3, Northern Lights M844W3
Procedure
- Inspect all components for damage; report any damage to the shipping company.
- Check the packing list at the back of this manual to be sure all parts are included.
- Select a mounting location per the IM1000 Installation Manual.
- Install toe bracket (item 1) to each corner of the genset base flanges.
- Use machine screws, flatwashers and nylock hex nuts (items 2, 3, 4) in the holes shown in Fig 1 and 1a.
Full service-parts list: Northern Lights M844LW3 →, Northern Lights M844W3 →
Source: Northern Lights service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.