Northern Lights M844LW3 / M844W3 — Install sound shield panels

Installation · Side, front and top panels

For the Northern Lights M844LW3 / M844W3, from the Northern Lights service manual.

Applies to: Northern Lights M844LW3, Northern Lights M844W3

Procedure

1. Install left side panel (item 17) and front panel (item 18) by aligning bottom pins to base pan flange grommets.
2. Slide the retaining blocks (item 8) up the vertical extrusion legs until captured by the panel slots.
3. Tighten the bolting assembly while holding the block in position.
4. Install the top panel (item 12) by placing the opposite side down and then pushing down the near side.
5. Install the right panel (item 19) by striking firmly with your hand to engage the paddle latch.

Full service-parts list: Northern Lights M844LW3 →, Northern Lights M844W3 →

Source: Northern Lights service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →