Northern Lights M844LW3 / M844W3 — Install rear panel
Installation · Rear panel assembly (item 16)
For the Northern Lights M844LW3 / M844W3, from the Northern Lights service manual.
Applies to: Northern Lights M844LW3, Northern Lights M844W3
Procedure
- Slide the pre-installed retaining clips into the two rectangular slots in the top of the rear panel.
- Push the rear panel (item 16) in from the bottom until flush with the back frame and base pan.
- Secure the rear panel with the provided 5/16 inch flat washer and 5/16 inch bolt.
- Guide the intake air snorkel hose into the small hole in the rear panel without kinking or bending it.
Full service-parts list: Northern Lights M844LW3 →, Northern Lights M844W3 →
Source: Northern Lights service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.