Northern Lights M844LW3 / M844W3 — Install panel retainer blocks

Installation · Panel retainer block (item 8)

For the Northern Lights M844LW3 / M844W3, from the Northern Lights service manual.

Applies to: Northern Lights M844LW3, Northern Lights M844W3

Procedure

1. Install front and left hand side panel retainer blocks (item 8) before adding the top of the enclosure frame.
2. Anchor each block to the vertical extrusion with a single long bolting assembly (item 7).
3. Loosely install blocks to the position and orientation shown in Fig 4.
4. Front left corner receives two blocks; front right and left rear receive one each.

Full service-parts list: Northern Lights M844LW3 →, Northern Lights M844W3 →

Source: Northern Lights service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →