Northern Lights M844LW3 / M844W3 — Install junction box support cover

Installation · Junction box support bracket cover (item 15)

For the Northern Lights M844LW3 / M844W3, from the Northern Lights service manual.

Applies to: Northern Lights M844LW3, Northern Lights M844W3

Procedure

1. Install the junction box support cover (item 15) into place, noting the shape of the foam backing.
2. Insert the foam block portion into the cavity of the support bracket and push until firmly engaged.
3. When installed, the cover should have about an inch overlap on the generator junction box rear face.

Full service-parts list: Northern Lights M844LW3 →, Northern Lights M844W3 →

Source: Northern Lights service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Northern Lights repair guides →